Purpose

This overview serves as the SmartHomeConcierge.ai master reference for the Berker KNX (Hager Group) ecosystem. It provides a comprehensive summary of products, platform capabilities, KNX building automation, lighting control, room control, shading automation, energy management, visualization, firmware management, and common configuration categories used by SmartHomeConcierge.ai technicians when assisting customers and creating device-specific configuration articles.

Berker, a brand of the Hager Group, is a German manufacturer of premium electrical wiring accessories and KNX building automation solutions. Berker combines award-winning switch designs with intelligent KNX technology, offering push-button sensors, touch sensors, thermostats, room controllers, and system components for residential, commercial, hospitality, and luxury building projects. Berker KNX products integrate seamlessly with the broader Hager KNX ecosystem and are commissioned using ETS, Hager Easy, or Hager quicklink depending on the product family.

Supported Product Families

KNX Push Button Sensors

• Berker B.IQ Push Button Sensors
• Berker TS Sensor
• Berker Touch Sensors
• KNX Push Buttons (Q. Series)
• KNX Push Buttons (R. Series)
• KNX Push Buttons (S.1 Series)
• KNX Secure Push Button Sensors

Room Control

• KNX Room Thermostats
• Room Temperature Controllers
• Climate Controllers
• Multi-Function Room Controllers

Touch Control

• Berker Touch Control
• Capacitive Touch Panels
• Glass Touch Interfaces
• Multifunction Control Panels

Lighting Control

• Lighting Scene Control
• Dimming Control
• RGB/RGBW Lighting Integration
• Occupancy Lighting
• Daylight Harvesting

Blind & Shutter Control

• Roller Shutter Control
• Venetian Blind Control
• Curtain Automation
• Sun Protection Automation

KNX Infrastructure

• Bus Couplers
• KNX Interfaces
• System Components
• Programming Interfaces
• Secure Communication Devices

Wiring Accessories

• 1930 Series
• R Classic Series
• Q. Series
• S.1 Series
• B. Series
• K. Series
• TS Series

Supported Communication Standards

Berker KNX products support:

• KNX TP (Twisted Pair)
• KNX Secure
• KNX Data Secure
• KNX IP (via Hager infrastructure)
• Ethernet (supported system components)
• Hager Easy
• Hager quicklink
• ETS Programming 

Software & Configuration Platforms

Primary engineering platforms include:

• ETS (Engineering Tool Software)
• Hager Easy
• Hager quicklink
• ETS Product Database
• Firmware Update Utilities
• Diagnostic Tools

Primary Customer Configuration Requests

SmartHomeConcierge.ai technicians commonly assist customers with:

Lighting Automation

• Configure push button sensors
• Configure lighting scenes
• Configure dimming
• Configure occupancy lighting
• Configure schedules

Climate Control

• Configure room thermostats
• Configure heating schedules
• Configure cooling schedules
• Configure comfort modes
• Configure room controllers

Blind & Shade Control

• Configure roller shutters
• Configure blinds
• Configure curtain automation
• Configure sun protection

Touch Sensors

• Configure button functions
• Configure scenes
• Configure LED status indicators
• Configure custom button assignments

KNX Infrastructure

• Configure bus couplers
• Configure physical addresses
• Configure group addresses
• Configure KNX Secure
• Configure ETS programming

Building Automation

• Configure room automation
• Configure centralized control
• Configure schedules
• Configure automation logic

Automation Features

Customers commonly automate:

• Welcome Home scenes
• Goodnight scenes
• Vacation mode
• Lighting schedules
• Blind automation
• HVAC scheduling
• Occupancy-based lighting
• Daylight harvesting
• Energy-saving modes
• Whole-building automation

Energy Management

Supported energy features include:

• Intelligent lighting control
• HVAC optimization
• Occupancy-based energy savings
• Daylight harvesting
• Energy-efficient room control
• Building energy optimization
• Consumption reduction through automation 

Security Features

Supported security capabilities include:

• KNX Secure
• KNX Data Secure
• Secure ETS commissioning
• Encrypted device communication
• Protected programming
• Secure building automation 

Diagnostics & Maintenance

Technicians may perform:

• KNX bus diagnostics
• Device discovery
• Communication testing
• Firmware updates
• Configuration backup
• Factory reset
• ETS troubleshooting
• Device replacement
• KNX Secure diagnostics

Common SmartHomeConcierge.ai Knowledge Base Categories

Future configuration articles may include:

• Berker KNX – Configure a B.IQ Push Button Sensor
• Berker KNX – Configure a TS Sensor
• Berker KNX – Configure Touch Control
• Berker KNX – Configure a Room Thermostat
• Berker KNX – Configure Lighting Scenes
• Berker KNX – Configure Dimming
• Berker KNX – Configure Blind Automation
• Berker KNX – Configure Room Controllers
• Berker KNX – Configure KNX Secure
• Berker KNX – Configure Physical Addresses
• Berker KNX – Configure Group Addresses
• Berker KNX – Configure ETS Programming
• Berker KNX – Configure Hager Easy
• Berker KNX – Configure Hager quicklink
• Berker KNX – Update Device Firmware
• Berker KNX – Restore Factory Defaults
• Berker KNX – Troubleshoot KNX Communication
• Berker KNX – Troubleshoot Touch Sensors
• Berker KNX – Configure Building Automation
• Berker KNX – Configure Energy Optimization

SmartHomeConcierge.ai Technician Notes

• Most Berker KNX devices are commissioned using ETS, while selected residential installations can also use Hager Easy or Hager quicklink depending on the supported product family. 
• The Berker B.IQ, TS Sensor, and Touch Control product families provide multifunction control of lighting, HVAC, blinds, and scenes from a single wall-mounted interface. 
• Berker KNX products are fully integrated into the Hager Group KNX ecosystem and support expansion through Hager visualization, automation, and energy management platforms. 
• Always verify firmware compatibility, ETS databases, physical addresses, group addresses, and KNX Secure settings before replacing or commissioning devices.
• Create a complete ETS project backup before performing firmware upgrades or major configuration changes to production KNX installations.