Purpose

This overview serves as the SmartHomeConcierge.ai master reference for the Briggs & Stratton ecosystem. It provides a comprehensive summary of Briggs & Stratton's smart standby generators, portable generators, battery energy storage systems, generator monitoring platforms, mobile app capabilities, automatic transfer switches, power management technologies, commercial power solutions, engine technologies, firmware management, remote diagnostics, connected services, and integration opportunities used by SmartHomeConcierge.ai technicians when assisting customers and creating device-specific configuration articles.

Briggs & Stratton is one of the world's largest manufacturers of small engines and residential backup power systems. While historically recognized for lawn equipment engines, the company has become a major smart home energy manufacturer offering permanently installed standby generators, portable generators, battery storage systems, automatic transfer switches, remote monitoring, load management, and intelligent power distribution designed to keep homes operating during utility outages.

Primary Product Categories

Home Standby Generators

Permanent whole-home backup generators

Available fuel options include:

• Natural Gas
• Liquid Propane (LP)

Power capacities include:

• 10 kW
• 12 kW
• 13 kW
• 16 kW
• 18 kW
• 20 kW
• 22 kW
• 24 kW
• 26 kW+

Features include:

• Automatic power restoration
• Weekly self-testing
• Automatic exercise schedules
• Quiet operation
• Corrosion-resistant enclosures
• All-weather operation
• Continuous voltage monitoring
• Remote diagnostics
• Intelligent engine management
• Automatic shutdown protection

Portable Generators

Portable emergency backup power

Available models include:

• Recreational generators
• Home emergency generators
• Contractor generators
• Inverter generators
• Open-frame generators
• Quiet inverter models
• Dual-fuel models
• Commercial portable generators

Supported applications include:

• Home backup
• RV power
• Camping
• Construction
• Outdoor events
• Emergency response
• Disaster recovery
• Job sites

Battery Energy Storage Systems

Briggs & Stratton SimpliPHI Energy Storage

Capabilities include:

• Home battery backup
• Solar energy storage
• Grid independence
• Time-of-use optimization
• Peak demand reduction
• Critical load backup
• Generator integration
• Renewable energy storage
• Emergency reserve power

Supports:

• Hybrid solar systems
• Grid-tied systems
• Off-grid installations
• Generator-assisted storage
• Smart energy management

Automatic Transfer Switches (ATS)

Supported ATS features include:

• Automatic utility monitoring
• Instant generator startup
• Automatic load transfer
• Automatic utility restoration
• Generator cool-down
• Safety interlocks
• Service disconnect options
• Whole-house transfer
• Essential circuit transfer
• Load prioritization

Available capacities include:

• 100 Amp
• 200 Amp
• Service entrance rated models

PowerProtect™ Series

Premium residential standby generator lineup

Features include:

• Commercial-grade Vanguard engine
• Intelligent electronic governor
• Low harmonic distortion
• Fast startup
• Quiet operation
• Remote monitoring
• Enhanced fuel efficiency
• Durable steel enclosure
• Corrosion protection

Smart Monitoring Platform

InfoHub™ Wireless Monitoring

Briggs & Stratton's cloud-connected monitoring platform provides remote visibility into generator health and operation.

Capabilities include:

• Generator status
• Utility power status
• Exercise history
• Run history
• Engine hours
• Battery condition
• Maintenance reminders
• Fault notifications
• Remote diagnostics
• Dealer service notifications

Mobile App Features

The Briggs & Stratton InfoHub app allows homeowners and technicians to remotely monitor backup power systems.

Features include:

Generator Dashboard

Displays:

• Generator online/offline
• Utility power available
• Generator running status
• Standby mode
• Alarm status
• Exercise schedule
• Maintenance status

Alerts & Notifications

Receive alerts for:

• Utility outage
• Utility restoration
• Generator started
• Generator stopped
• Failed exercise
• Low battery
• Maintenance due
• Service required
• Engine fault
• Communication loss
• Low fuel (where applicable)

Maintenance Monitoring

Track:

• Oil changes
• Air filter replacement
• Spark plugs
• Battery replacement
• Exercise completion
• Engine runtime
• Scheduled service

Service History

View:

• Previous maintenance
• Fault history
• Generator events
• Exercise logs
• Power outage history
• Runtime history

Generator Monitoring Capabilities

Monitor:

• Engine RPM
• Oil pressure
• Oil temperature
• Coolant temperature (where applicable)
• Battery voltage
• Charging system
• Fuel supply
• Frequency
• Output voltage
• Load percentage
• Utility voltage
• Transfer switch status

Intelligent Engine Protection

Automatic shutdown protection includes:

• Low oil pressure
• High engine temperature
• Overspeed
• Overcrank
• Overload
• Battery charging failure
• Sensor failure
• Governor faults
• Fuel pressure issues
• Electrical faults

Weekly Exercise Scheduling

Generators automatically perform self-tests.

Scheduling options include:

• Day of week
• Time of day
• Quiet Exercise mode (supported models)
• Exercise duration
• Automatic diagnostics
• Battery charging verification

Intelligent Load Management

Supports:

• Whole-home backup
• Essential circuits
• Smart load shedding
• HVAC management
• Air conditioner prioritization
• Electric water heater control
• Pool equipment management
• EV charger management (installation dependent)

Fuel Management

Supports:

Natural Gas

• Continuous utility fuel
• Automatic pressure monitoring
• Fuel interruption detection

Liquid Propane

• Tank monitoring compatibility
• Pressure regulation
• Fuel consumption estimates

Generator Operating Modes

Modes include:

• Automatic
• Manual
• Off
• Exercise
• Service
• Test
• Emergency run
• Remote monitoring

Remote Diagnostics

Technicians can review:

• Fault codes
• Operating history
• Exercise history
• Engine performance
• Voltage logs
• Frequency logs
• Battery condition
• Maintenance history
• Communication status

Battery Backup Integration

Supports coordinated operation with:

• Battery storage
• Solar inverters
• Critical load panels
• Automatic transfer switches
• Hybrid energy systems

SimpliPHI Battery Features

Includes:

• Lithium Ferro Phosphate (LiFePO₄) chemistry
• High cycle life
• Thermal stability
• Modular expansion
• Backup power
• Solar charging
• Generator charging
• Utility charging
• Off-grid capability

Connected Home Capabilities

Can support automation scenarios such as:

• Generator starts during outage
• Smart lighting remains operational
• Security systems stay powered
• Wi-Fi equipment backed up
• Network racks remain online
• Smart locks continue operating
• Refrigeration remains powered
• Medical devices protected
• Garage door operation maintained

SmartHome Integration Opportunities

Depending on installation and third-party platforms, Briggs & Stratton systems can integrate with:

• Amazon Alexa
• Google Home
• Apple Home (through supported third-party solutions)
• Home Assistant
• Control4
• Crestron
• Savant
• RTI
• ELAN
• Josh.ai
• Homey
• Hubitat
• SmartThings
• Node-RED
• MQTT-based automation
• IFTTT (through supported integrations)

Commercial Solutions

Briggs & Stratton also manufactures commercial backup systems for:

• Small businesses
• Medical offices
• Restaurants
• Retail locations
• Schools
• Agricultural facilities
• Municipal buildings
• Telecommunications
• Critical infrastructure

Maintenance Requirements

Routine maintenance includes:

• Oil changes
• Oil filter replacement
• Air filter replacement
• Spark plug replacement
• Valve inspection
• Battery testing
• Fuel system inspection
• Transfer switch inspection
• Wiring inspection
• Firmware updates (where supported)
• Exercise verification
• Complete annual inspection

Common Customer Requests

SmartHomeConcierge.ai technicians commonly assist customers with:

• Generator registration
• InfoHub app setup
• Wi-Fi connection
• Cellular communication troubleshooting
• Generator offline issues
• Transfer switch operation
• Exercise schedule configuration
• Maintenance reminders
• Fault code interpretation
• Remote monitoring setup
• Battery replacement guidance
• Firmware updates
• Utility outage history review
• Generator runtime analysis
• Load management configuration
• Smart home integration
• Solar and battery coordination
• Generator sizing recommendations
• Remote diagnostics
• Warranty information

SmartHomeConcierge.ai Technician Notes

When supporting Briggs & Stratton customers, always verify:

• Exact generator model number
• Serial number
• Fuel type (Natural Gas or LP)
• Generator capacity (kW)
• Transfer switch model
• Communication module status
• InfoHub account registration
• Mobile app version
• Internet or cellular connectivity
• Utility power status
• Battery condition
• Active fault codes
• Maintenance history
• Exercise schedule configuration
• Firmware version
• Installed battery storage (if applicable)
• Solar inverter compatibility
• Critical loads protected
• Existing smart home ecosystem
• Whether the customer wants monitoring only or full smart home automation integration